ENVI Series: VTC-IR40-N
173
Items
Descriptions
A
IP-Device ID
IP-Device ID is displayed. (not allowed to modify)
B
Vendor
Select the Vendor of the device.
C
Model
Select how many channels the device support.
D
Name
Change the Name as required.
E
IP Address
Enter the IP Address to use with the selected device.
F
Input IP Address Range
(not allowed to modify)
G
Getting Information from
IP-Device
(not allowed to modify)
H
VS Module ID
Select the VS Module ID. Enter 0 for non-Vitek IP devices. Vitek
products can be set to 0 to 15, and default is 0.
I
HTTP Port
Enter the HTTP Port to use with the IP-Device. (Default is 80)
J
RTSP Port
Enter the RTSP Port (Default is 554)
K
Login ID
Type in the Login ID to use. (Default is root)
L
Login Password
Type in the Login Password to use for the Login ID. (Default is
root)
M
Confirm Password
Type in the same password to confirm. (Default is root)
N
Checking available
resolution
Select the Video Resolution for the device.
Not used, all resolution
is done at camera level
O
Checking available
PTZ camera
Checkboxes to choose if PTZ is supported.
P
OK
Click this button to apply the changed values.
Содержание VTC-IR40-N
