background image

VITEK LIMITED PRODUCT WARRANTY

VITEK products carry a three (3) year limited warranty. Digital recording and storage products 
are also warranted for 3 years except for the hard drives which carry their own independent fac-
tory warranty from the hard drive manufacturer. VITEK warrants to the purchaser that products 
manufactured by VITEK are free of any rightful claim of infringement or the like, and when used 
in the manner intended, will be free of defects in materials and workmanship for a period of three 
(3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty 
is non-transferable and extends only to the original buyer or end user customer of a Vitek Author-
ized Reseller. 

This warranty shall not apply to repairs or replacements necessitated by any cause beyond 
the control of VITEK, including but not limited to, acts of nature, improper installation, excess 
moisture, misuse, lack of proper maintenance, accident, voltage fluctuations, or any unauthor-
ized tampering, repairs or modifications. This warranty becomes VOID in the event of alteration, 
defacement, or removal of serial numbers. 

Within the first 6 months of purchase, VITEK will replace or credit any defective product at the 
request of the customer (subject to availability) with a new product that equals or exceeds the 
performance of the original product purchased. 

Within the first 6 months of purchase, at its sole discretion, VITEK may issue an advance replace-
ment for a defective product; however, all related costs including, but not limited to shipping and/
or delivery charges will be the responsibility of the customer. If upon return inspection a product 
is determined to be in good working order or shows evidence of misuse, the customer will be re-
sponsible for full payment of the original product purchased as well as the replacement product. 

Beyond the first 6 month period for the remainder of the warranty, VITEK’S responsibility shall be 
limited to repairing the defective product, including all necessary parts and related labor costs. 
At its sole discretion, VITEK may choose to either exchange a defective product or issue a mer-
chandise credit towards future product purchases. Any replacement parts furnished in connec-
tion with this warranty shall be warranted for a period not to exceed the remaining balance of the 
original equipment warranty. 

A Return Authorization number or “RA” number must be obtained prior to the return of any item 
for repair, replacement, or credit. VITEK requires that this “RA” number be clearly printed on the 
outside of the shipping carton to avoid refusal of said shipment. The Return Authorization number 
expires after 30 days. Products returned after the 30 day period will be subject to refusal. Ship-
ping charges, if any, must be prepaid. A copy of the bill of sale (or invoice of purchase), together 
with a complete written explanation of the problem must accompany all returns. 

Vitek makes no warranty or guarantee whatsoever with respect to products sold or purchased 
through unauthorized sales channels. Warranty support is available only if product is purchased 
through a Vitek Authorized Reseller.

Содержание VT-PTZ12W



















































Отзывы: