VT-PTZ12
22
Follow the steps below to program the
Home
function:
1. Select the camera number by pressing
No.
and
CAM
2. Press
MENU
to display the main menu on the monitor.
3. Moving the
Joystick
to the right on
“FUNCTIONS”
.
4. Enter Home Function menu by moving the
Joystick
to the right.
5. Moving the
Joystick
to the right/ left (or twist CCW/CW) to scroll Tour, Pattern,
and Auto Scan and Preset functions.
6. Select Function Number by pulling the
Joystick
down, and twist the
Joystick
to the CCW/CW (or turn right/left). The executable function number will be scrolled.
If selected function is not programmed, it won’t change. Go to setup function first.
7. Pull the
Joystick
down and twist the
Joystick
to CCW/CW (or twist the
joystick to right/left) to set waiting time.
8. Highlight
OPERATION
option by pulling the
Joystick
down. Choose operation
status Enable or Disable by moving the
Joystick
to the right or to the left (or
twist CCW/CW).
3.1.2 PRESET (
MENU
=> FUNCTIONS => PRESET Short Cut:
PRST
)
Preset stores pan, tilt, zoom, focus and iris settings. Once programmed, pressing
combination of
0
~
9
numbers and the
Preset
button on the controller should
automatically call up the preset position. Presets may be assigned to alarm actions or
as the “home” position for the dome camera.
Highlight
PRESET
and then move the joystick to the right to enter
PRESET
menu.
There are 8 pages of
preset
programming
menu. Each page can hold up to 8 presets. Locate the
“
PREV NEXT
”
, preset menu
pages can be scrolled by moving the
Joystick
to the Left or Right on the “
PREV
NEXT
”
.
FUNCTIONS
HOME FUNCTION
PRESET
PATTERN
SCAN
TOUR
EXIT
