Vitek VT-NV1600P, Руководство пользователя, Страница: 47 / 100

VT-NV Series – On Cue IP
46
NVR display two IP addresses one for Ethernet and one for Local port.
Do not use same IP address range for Local Port and Ethernet Port.
! MAC address 1(Ethernet port): shows Mac address configured by manufacturer.
! Mac address 2 (local port): shows Mac address configured by manufacturer.
! DDNS SERVER ADDRESS: If DDNS is enabled, the host DDNS server is specified
here.
! NVR SERVICE PORT: Port number for NVR network operation
! WEB SERVER PORT: Port number that the NVR uses to support remote
connections.
! FAN STATUS: Display FAN Speed of installed fan (RPM).
Cooling fan’s speed is monitored, if stopped or slowed, alarm will occur.
! TEMPERATURE: Display internal temperature of NVR ( / ).
SYSTEM NAME: A system name of up to 15 characters can be defined. It is used so that
notification emails can be identified.
F/W UPGRADE: Firmware updates may be released periodically to enhance system
performance and add extra features. The operator can upgrade the firmware using a USB
memory stick.
FACTORY DEFAULT: If settings have been changed which causes erratic behavior, the
factory default settings can be loaded.
SYSTEM DATA: System settings can be saved to a USB memory stick. The settings can
be reloaded in case of accidental factory reset or can be transferred to another NVR.
Caution) 4ch NVR: USB port is used in front panel.
8/16ch NVR: Left USB port in Front should be used.
VIDEO OUTPUT: Select NTSC or PAL.
Changing the video signal will reboot NVR.
AUTO LOGIN (PASSWORD): Selects if a password is required ‘ON / OFF’.
Note) Password must be selected to ‘ON’ if USER MANGEMENT options are required.
MAKE RESCUE DISK: Create Rescue Disk.
! How to Create a RESCUE Disk
# Plug a USB thumb drive in the USB port of NVR
# Click the ‘create’
! How to recover
# Disconnect the HDD’s of NVR
# Plug the rescue disk USB thumb drive into the USB port of NVR
# Turn on the NVR. NVR will load the system from rescue disk.