Vitek VT-8249, Инструкция по эксплуатации

Страница: 6 / 40

6
ENGLISH
•
Dry your hair for some time (depending on your hair type), control-
ling the temperature and intensity of the air flow with the switch (4).
• To fix the lock set the operation mode switch (4) to the position « * »,
the air flow temperature will decrease that helps to fix the hair style.
•
Remove the thermo brush (1 or 7) from the hair lock.
Note:
– if it is hard to remove the brush attachment from the hair, switch the
hot air styler off by setting the switch (4) to the position «0», discon-
nect the thermo brush (1 or 7) from the unit body (5) and carefully
remove it from the hair lock;
– avoid contact of heated surfaces of the thermo brush (1 or 7) with
your face, neck and other parts of your body.
OVERHEATING PROTECTION
Overheating protection switches the hot air styler off if the outgoing
air is too hot. If the hot air styler is switched off during operation, set
the switch (4) to the position «0», unplug the unit and make sure that
the air inlets and outlets are unblocked. Let the unit cool down for
10-15 minutes and switch it on again. Do not block the air inlets during
the hot air styler operation and avoid getting of hair into the air inlets.
CLEANING AND CARE
• Set the switch (4) to the position «0» and unplug the unit, wait until
the thermo brush cools down completely.
•
Remove the thermo brush (1 or 7) from the hot air styler body (5).
•
Clean the thermo brush off hair.
•
Wipe the unit body (5) with a damp cloth and then wipe it dry.
•
Clean the air inlet grid with a brush.
• Do not immerse the body of the hot air styler, the power cord and
the power plug into water or other liquids.
•
Do not use abrasives and solvents to clean the unit body.
STORAGE
•
Disconnect the unit from the mains and clean it.
•
Never wind the power cord around the hot air styler body, as it can
damage the cord or the unit body.
•
Handle the power cord with care, do not pull, twist or stretch
it, especially near the power plug or at the junction point.
Periodically straighten the cord if it gets twisted during the hot
air styler operation.
•
For easy use of the hot air styler, it has a hanging loop (6) you can
hang the unit on, provided that no water gets on the unit.
• Keep the unit in a dry cool place out of reach of children and dis-
abled persons.
DELIVERY SET
Hot air styler – 1 pc.
Thermo brush 35 mm in diameter – 1 pc.
Thermo brush 50 mm in diameter – 1 pc.
Manual – 1 pc.
Warranty certificate – 1 pc.