Vitek VT-8249, Инструкция по эксплуатации

Страница: 3 / 40

3
ENGLISH
HOT AIR STYLER VT-8249
The hot air styler is used for styling dry or slightly wet hair.
DESCRIPTION
1. Thermo brush 50 mm in diameter
2. Thermo brush lock
3. Thermo brush rotation on buttons
4. Operation mode switch «0/
*
/1/2»
5. Body
6. Hanging loop
7. Thermo brush 35 mm in diameter
ATTENTION!
• Do not use the unit near containers filled with water (such as
bath, swimming pool etc.) and in rooms with high humidity.
• After using the unit in a bathroom, unplug it by taking the power
plug out of the mains socket, as closeness of water is danger-
ous even if the unit is switched off.
• For additional protection you may install a residual current
device (RCD) with nominal operation current not exceed-
ing 30 mA into the bathroom mains; contact a specialist for
installation.
SAFETY MEASURES
Before using the unit, read this manual carefully and keep it for
future reference.
Use the unit for intended purposes only, as specified in this manual.
Mishandling the unit can lead to its breakage and cause harm to the
user or damage to his/her property.
• Before switching the hot air styler on, make sure that your home
mains voltage corresponds to unit operating voltage.
• To avoid fire, do not use adapters for connecting the unit to
the mains.
• Use only the attachments supplied.
• When using the unit, we recommend to unwind the power cord
to its full length.
• The power cord may not:
– touch hot objects,
– run over sharp edges of furniture,
– be used for carrying the unit.
• Do not switch the unit on in places where aerosols are sprayed
or highly flammable liquids are used.
•
Do not use the unit outdoors.
•
Do not use the unit when you are drowsy.
•
Do not operate the unit while taking a bath.
•
Do not use the unit to style wet hair or synthetic wigs.
•
Hair spray shall be applied only after hair styling is finished.
•
Never leave the operating unit unattended.
•
Do not touch the unit body, the power cord and power plug
with wet hands.