5
ENGLISH
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS AND
WORK SPACES IS PROHIBITED.
USING THE HOT AIR STYLER
After unit transportation or storage at low temperature keep
it for at least three hours at room temperature before switch-
ing on.
•
Unpack the hot air styler and remove any stickers that can prevent
unit operation.
•
Unwind the power cord completely.
•
Install one of the thermo brushes (1 or 7). To do this insert the ther-
mo brush (1 or 7) into the hot air styler body (5) and turn the lock (2)
clockwise until bumping.
•
Before switching the unit on, make sure that your home mains volt-
age corresponds to the unit operating voltage.
•
Make sure that the operation mode switch (4) is set to the posi-
tion «0».
•
Insert the power plug into the mains socket.
•
Set the required settings of the air flow using the switch (4):
«0» – the hot air styler is switched off;
«
*
» – «cool» air supply;
«1» – low speed and low temperature;
«2» – high speed and high temperature.
•
You can change the thermo brush (1 or 7) rotation direction with
the buttons (3). During the operation press and hold down the
button (3), the thermo brush (1 or 7) will rotate in the required
direction.
Note: during the first operation some foreign smell and a small amount
of smoke from the heating element is possible, it is normal.
•
After the hot air styler operation is finished, switch it off by setting
the switch (4) to the «0» position and unplug it.
•
Wait till the thermo brush cools down.
•
To remove the thermo brush (1 or 7) turn the lock (2) counterclock-
wise until bumping.
USING THE THERMO BRUSH
To get the best results, wash your hair with shampoo (before drying
and styling), dry it with a towel to remove excessive moisture and
comb your hair.
•
Install the thermo brush (1 or 7) and fix it by turning the lock (2)
clockwise until bumping.
•
Insert the power plug into the socket, switch the hot air styler on
and set the required heating mode and air flow intensity with the
switch (4).
•
Divide the hair into locks.
•
Wind a lock of hair on the thermo brush (1 or 7) selecting the brush
(1 or 7) rotation direction with the buttons (3); when the hair lock
is wound around the brush, release the button (3), and the thermo
brush (1 or 7) rotation will stop.
Содержание VT-8249
Страница 1: ...Фен щетка VT 8239 BD Hot air styler 3 8 15 21 27 33 VT 8249 ...
Страница 2: ...1 1 0 0 W 1 3 4 5 7 6 2 ...
Страница 39: ......
