8
ENGLISH
Snooze function
During the alarm (radio) signal you can press the button
(12) «SNOOZE/DIMMER» to switch the alarm off for 9
minutes; the alarm signal will be repeating until you switch
it off by pressing one of the buttons (4 or 5) «AL1 or AL2».
Display brightness adjustment
Consequently press the button (12) «SNOOZE/DIMMER» in
the current time mode, the display brightness will change.
RADIO
Note:
electromagnetic interference can influence the
radio operation. In this case move the clock radio to
another place or change its position horizontally.
Radio stations reception
1.
Plug the unit into the mains and press the button (13)
«POWER», the received radio station frequency (8) will
appear on the display (8) and after 5 seconds the cur-
rent time will be shown.
2.
Press the button (14) «BAND» to select the frequency
range.
3.
Press or press and hold the setting buttons (2, 3)
«TUNING
▲
, TUNING
▼
» to tune to the desired radio
station.
4.
Press the buttons (4, 5) «VOLUME
▲
, «VOLUME
▼
» to
set the required volume level.
Notes:
–
for better reception in FM band straighten the antenna
(18) cord and place it under the desired angle.
–
the built-in antenna receives signal in AM range; for
better reception in AM range try to place the radio
horizontally and direct it to the transmitting radio
station.
Radio stations presetting
You can tune to and save 10 radio stations in the unit
memory.
1.
Switch the radio on and tune in to the radio station you
want to program.
VT-6611_IM_70x130.indd 8
04.07.2017 10:34:04