7
ENGLISH
2.
Press the button «SET» once, the digital symbols will
stop flashing, press the button «SET» again and hold
it, the digital symbols will start flashing again.
3.
Press the “hours” setting button (2) «HR» and set the
current time in “hours”.
4.
Press the “minutes” setting button (3) «MIN» and set
the current time in “minutes”.
5.
After 5 seconds the digital symbols will stop flashing
and the current time will be set.
Alarm signal actuation time setting
This model of clock radio allows using two alarms «AL1
and AL2».
Before setting the alarm actuation time make sure that the
current time is set correctly.
1.
In current time mode press and hold one of the but-
tons (4 or 5) «AL1 or AL2», the flashing digital symbols
(8) will appear on the display (11).
2.
Press the “hours” setting button (2) «HR» to set time
in “hours”.
3.
Press the “minutes” setting button (3) «MIN» to set
time in “minutes”.
4.
In 5 seconds after setting the alarm actuation time the
display (11) will show current time.
5.
Press the buttons (4 or 5) «AL1 or AL2» repeatedly to
switch the alarm on and select the sound mode type:
–
switching on the alarm sound, the light indicators
(7 and 9);
–
switching on the alarm sound mode «RADIO», the light
indicators (6 and 10).
Note:
–
if you select the alarm signal «Radio», first tune the radio
to the desired radio station and set the volume level.
6.
To check the alarm actuation time press and hold one
of the buttons (4 or 5) «AL1 or AL2», the flashing digi-
tal alarm actuation time symbols (11) will appear on the
display (11), and after 5 seconds the display (11) will
show current time.
7.
To switch the alarm signal off press the button (4 or 5)
«AL1 or AL2» repeatedly until the light indicators (6, 7
or 9, 10) go out.
VT-6611_IM_70x130.indd 7
04.07.2017 10:34:04