Vitek VT-4282, Инструкция по эксплуатации, Страница: 6 / 48

6
ENGLISH
–
Press and hold the program selection/ON/
OFF knob (12). You will hear a sound sig-
nal, and the symbols «- - - -» will appear on
the cooking program operation time dis-
play (17).
–
The unit has switched to the standby mode
and is ready for use.
Note:
–
pressing the active button is accompanied by
a sound signal.
RICE COOKING PROGRAM
–
Load the rice into the bowl (10), set the
bowl (10) into the process chamber and close
the lid (3).
–
In standby mode the display (17) shows the
symbols «- - - -». Turn the knob (12) and
select the “Rice” program. The “Rice” cook-
ing program indicator (16) will light up, the
symbols “
” will appear on the cook-
ing time display (17). The digital valus of the
cooking temperature “100” (the default cook-
ing temperature in the “Rice” program) will
appear on the cooking temperature display
(18), and the “KEEP WARM” function indica-
tor (20) will light up.
–
To switch the cooking program on, press the
knob (12). The symbols “
” will be cir-
cling on the display (17). You can switch off
the keep-warm function by pressing the knob
(12) again, the “KEEP WARM” function indi-
cator (20) will go out. After the “Rice” cook-
ing program is finished, you will hear sound
signals and the symbols “bb” will appear on
the display (17).
Note:
–
after switching the “Rice” cooking program
on, you can switch the “KEEP WARM” function
off by pressing the knob (12) once again, the
indicator (20) will go out.
–
to cancel a cooking program, press the “KEEP
WARM/CANCEL” button, the multicooker
will switch to the standby mode, the symbols
«- - - -» will appear on the display (17).
–
to switch the multicooker off, press and hold
the knob (12). You will hear a sound signal and
the displays (17, 18) will go out.
–
If you want the cooked rice to remain hot,
do not switch the multicooker off and do not
unplug it.
Note: - it is not recommended to use the keep
warm mode for a long time to avoid changing of
the taste of the cooked rice.
–
To switch a program off, press the “KEEP
WARM/CANCEL” button (19), the multicooker
will switch to the standby mode.
–
To switch the multicooker off, press and hold
the knob (12). You will hear a sound signal and
the displays (17, 18) will go out.
–
Press the button (4), open the lid (3); be care-
ful to avoid burns by the outgoing steam.
Attention!
–
To avoid getting burns, be careful when open-
ing the lid (3).
–
Stir the cooked rice with the scoop (24).
–
Remove the bowl (10) from the multicooker
using potholders.
–
Remove the cooked rice from the bowl (10).
–
Wait until the bowl (10) cools down, wash it
with warm water and neutral detergent, rinse
and dry.
SELECTING A COOKING PROGRAM
AND SWITCHING IT ON
–
Switch the multicooker on by pressing and
holding the knob (12).
–
In the standby mode, turn the knob (12) clock-
wise/counterclockwise to select a cooking
program.
–
The cooking program selection is looped, the
cooking program indicators (16) will alter-
nately light up on the control panel (2) and the
default cooking time digits will appear on the
display (17). The default cooking temperature
digits will appear on the display (18).
–
After selecting the required cooking program
the default program operation time will be
shown on the display (17). To change the
cooking time, press the “TIME” button (13),
the “hours” digits of time will be flashing on
the display (17). Turn the knob (12) to set
the required “hours” of cooking time, press
the “TIME” button (13) to confirm. Press the
“TIME” button (13) again, the “minutes” dig-
its of time will be flashing on the display (17).
Turn the knob (12) to set the required “min-
utes” of cooking time, press the “TIME” but-
ton (13) to confirm.
–
After selecting the cooking program you
can use the delayed start function (see the
table “Cooking programs and duration).
To do this, press the “DELAYED START” but-
ton (14), the button (14) indicator and the
selected cooking program indicator (16) will
be flashing and the default delayed start
time «0:30» will be shown on the display.
IM VT-4282.indd 6 28.03.2019 10:51:48