Vitek VT-3523 BK, Инструкция по эксплуатации, Страница: 5 / 32

5
ENGLISH
4. Use the buttons (7)
7
and (9)
8
, to select the
necessary minutes.
5. Press the button (16)
1
. Symbols of alarm
signal repeating mode will appear on the
display. Use the buttons (7) and (9) to select
the necessary mode.
1-1 without repeat,
1-5 alarm signal repeating from Monday to
Friday,
1-7 alarm signal repeating seven days a
week,
6-7 alarm signal repeating on Saturday and
Sunday.
6. Press the button (16)
1
. If you set the alarm
signal without repeat (1-1), the alarm day
digits will appear on the display (14). Using
buttons (7)
7
and (9)
8
set the alarm day (1
- Monday, 2 - Tuesday etc.). Press the button
(16)
1
.
7. The alarm signal symbols will start flashing on
the display. Use the buttons (7)
7
and (9)
8
to select the necessary alarm signal. Sound
signal (symbol «bu») or radio (tuned station
frequency appears).
Note: If you want to select the radio as alarm
signal, preliminary tune the required radio
station (see “Radio stations reception”).
8. Press the button (16)
1
, then set the volume
level by pressing buttons (7)
7
and (9)
8
(volume level adjustment is not available
when setting the alarm signal).
9. To finish the setting of the first alarm, press
the button (16)
1
.
10. Repeat steps 2-9 for the second alarm (15)
2
.
Note:
-
If buttons (7)
7
and (9)
8
are not pressed
during 30 seconds, the unit will switch to the
current time mode.
-
Alarm operation is only possible when the unit
is connected to the mains.
Switching alarms on/off
1. To switch the alarm (alarms) on press the
button (16)
1
and/or (15)
2
until the
indicators (18) and/or (17), respectively,
appear.
2. To switch the alarm (alarms) off press the
corresponding button in the current time
mode again. Indicator of the corresponding
alarm will switch off.
Alarm snooze
1. You can switch off the alarm signal for
9 minutes by pressing the button (11)
“SNOOZE/SLEEP”. The indicator of the
selected alarm will flash; alarm signal will be
repeated in 9 minutes.
2. To switch off alarm sound signal press the
button (5) “ON/OFF” or the button of the
corresponding alarm (16)
1
or (15)
2
.
Note: The alarm/radio signal will sound for 30
minutes if you do not press any buttons.
Alarm settings and temperature displaying
Room air temperature is shown on the additional
display (14) on default.
1. To show the first alarm settings on the
additional display (14) press the button (10)
«TEMP/ALARM». in current time mode (radio
is off). The first alarm settings will appear on
the display (14) and the indicator (point) will
appear to the left of the settings.
2. To check the second alarm settings, press
the «TEMP/ALARM» button (10) again. The
second alarm settings will appear on the
display (14) and the indication (point) will
appear to the right of the settings.
3. Press the button (10) «TEMP/ALARM» for
the third time; the room air temperature will
appear on the display.
Temperature measurement units selecting
1. Set the temperature indication on the
additional display (14) in the current time
mode (see “Alarm settings and temperature
displaying”).
2. Press the button (3) «C-F» to select the
temperature measurement units (Celsius
degrees, Fahrenheit degrees).
Display brightness (13)/ (14) setting (two
displays, the brightness is set up simultaneously)
Set up the necessary display (main and
additional) brightness by pressing the button
(11) “DIMMER” repeatedly in the current time
mode.
Display (13)/ (14) (two displays) automatic
switching off
1. In the current time mode press and hold the
«DISPLAY AUTO OFF» button (8) until the
indication (19)
appears. The display will
switch off in 10 seconds.
3523.indd 5 6/18/12 11:36 AM