8
ENGLISH
meshes and the rotating blades. The procedure takes less than
a minute. Apply a lubricant as needed, for example, if you often
rinse the shaving block with warm water, you need to lubricate it
more frequently, almost after each rinsing.
At any abnormal noise lubricate each shaving head mesh with a
lubricant drop. Switch the shaver on and lubricate the outside of
each mesh with a lubricant drop. Make sure the abnormal noise
has disappeared and switch the shaver off. Remove excess
lubricant with a cloth.
Attention! Use only a shaver or clipper lubricant. DO NOT
use vegetable oil, grease or oil-solvent mixture for lubrication.
Solvents tend to evaporate, whereupon the thick lubricant
remains may slow down the blades rotation.
STORAGE
•
Before storing the shaver, clean and lubricate it according to
the «Cleaning and Maintenance» section.
•
Wipe the shaver body with a soft, slightly damp cloth and
then wipe it dry.
•
Do not use metal brushes and abrasive detergents or sol-
vents for cleaning.
•
Put the protective cap (1) on the shaving heads (2).
•
Store the shaver in a cool dry place away from children.
ENVIRONMENTAL PROTECTION
– The shaver is provided with a disposable battery. Before you
throw away the inoperative shaver discharge the battery com-
pletely, remove it and dispose of it according to the hazardous
waste disposal regulations of your country.
– Do not throw away the shaver until you remove the builtin
battery.
DELIVERY SET
Men shaver – 1 pc.
USB cord – 1 pc.
Protective cap – 1 pc.
Cleaning brush – 1 pc.
Power supply unit – 1 pc.
Manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Electric shaver
Power supply: 2,4 V, built-in rechargeable Ni-Mh
battery 600 mAh
Rated input power: 2 W
Input voltage: 5 V
1000 mA
Charging time: 8 hours
Continuous operation time: 60 minutes
IPX7
Содержание VT-2365
Страница 1: ...Электрическая бритва VT 8262 Men shaver 4 10 18 25 33 41 VT 2365 ...
Страница 2: ...9 7 8 Рис 1 6 5 4 3 2 1 10 11 12 ...
Страница 3: ...Рис 2 Рис 3 Рис 4 Рис 5 Рис 6 ...