14
ENGLISH
sponding center for recycling of it. Do not
burn the vacuum cleaner even if it is badly
damaged without removing the battery to
avoid the battery explosion.
•
It is recommended to remove the battery (5)
for long storage of the vacuum cleaner.
•
Press on the battery (5) compartment lid locks
and remove the lid.
•
Remove the battery (5) and remove the socket
from the slot on the plate.
STORAGE
•
Before taking the vacuum cleaner away for
long term storage clean its body, the dust
compartment (20) and the filters (17, 19).
•
Pour the water out of the water tank (13),
wash and dry the wet floor cleaning attach-
ment (39).
•
Remove the battery from the remote control.
•
Use the original package for storage.
•
Keep the vacuum cleaner in a dry cool place
out of reach of children and disabled persons.
TABLE OF LIGHT AND SOUND SIGNALS OF THE VACUUM CLEANER
Light signals
Vacuum cleaner state
Color indication
Battery charging mode
Flashing purple
Battery charging is finished
Blue
Ready mode
Flashing blue
Malfunction
Flashing red
Low battery
Flashing red
Sound signals
Number of sound
signals
Malfunction
Solution
1
•
The vacuum cleaner got stuck
Move the vacuum cleaner to a free place.
2
••
Dust bin is malfunctioning
Remove the dust bin and install it again.
3
•••
The driving wheel or the side
brushes are damaged.
If they don‘t rotate, contact the service
center.
4
••••
Anti-drop sensor is malfunctioning. Clean the sensors from dust.
Possible troubles and troubleshooting
№ Malfunction
Possible causes
Solution
1
The battery doesn‘t
charge.
The vacuum cleaner is set
improperly on the charging
station.
Make sure that the contact points for
battery charging on the vacuum cleaner
body and on the charging station are clean.
If necessary, wipe the contact points.
Slightly move the vacuum cleaner body
by hands to provide better contact with
the charging station.
The charging station power
adapter is disconnected
from the mains.
Connect the charging station and plug
the power adapter to the mains socket.
The battery is fully
discharged.
Place the vacuum cleaner on the charging
station by hands, after 3 minutes remove
the vacuum cleaner from the charging
station, repeat these battery charging
cycles at least 3 times; then charge
the battery in a normal cycle.
IM VT-1804_2020.indd 14
4/21/20 2:05 PM
