13
ENGLISH
•
Press on the rotating brush (9) holder
frame (10) locks and remove it.
•
Lift the left side of the brush (9) and remove it.
•
Clean the brush (9) from garbage, hair, threads
etc.
•
Install the brush (9) back to its place, to do
this insert the right side of the brush (9) first
and then lower the left side of the brush (9)
in the installation place. Make sure that the
brush (9) is installed correctly.
•
Install the rotating brush (9) holder frame
(10) back to its place until the locks click-
ing, make sure that the frame (10) is fixed
properly.
•
Clean the front wheel (4) from dust and gar-
bage and wipe it. Remove hair, if there are
any, make sure that nothing hinders the
wheel (6) free rotation.
•
Clean the contact points for battery charg-
ing (12) on the vacuum cleaner and the con-
tact points on the charging station (22) from
dust.
•
Clean and wipe the anti-drop sensors (6) on
the bottom part on the vacuum cleaner body.
•
Wipe the vacuum cleaner body with a slightly
damp cloth and then wipe it dry.
•
Do not immerse the vacuum cleaner body,
the power adapter (24), the connecting cord
of the power adapter (24) and the charging
station into water or any other liquids. Provide
that no liquid gets inside the vacuum cleaner
body.
•
Do not use solvents or abrasives for clean-
ing the vacuum cleaner body, the power
adapter (24) and the charging station.
Removing the battery (5)
•
Before you dispose of the vacuum cleaner,
remove the battery and apply to the corre-
IM VT-1804_2020.indd 13
4/21/20 2:05 PM
