Vitek VT-1692, Инструкция по эксплуатации

Страница: 6 / 68

6
ENGLISH
side the operating chamber; it serves
to protect the magnetron.
Setting the glass tray
1. Set the rotating socket (4) in the open-
ing situated on the bottom of the operat-
ing chamber.
2. Set the roller ring (5) on the bottom of
the chamber.
3. Carefully set glass tray (5), by matching
ledges and grooves of the support.
4. Never set the glass tray with its bottom
upside down.
• Do not prevent rotation of the glass tray
while operating the oven.
• During cooking always use glass tray
and tray support.
• Products and cookware should be al-
ways set only on the glass tray.
• The glass tray can rotate clockwise/anti
clockwise. It is normal.
• If cracks or chops appear, stop using
the unit immediately or replace the glass
tray.
OPERATION
• Before switching on the unit, make sure
that the voltage in your home socket cor-
responds to the voltage specified on the
unit.
• Put the products inside the working
chamber and close the door
Cooking products
• Set the required cooking power by ad-
justing the handle (7) to the desired posi-
tion.
Function Power output Products
low 17% Melting ice-cream, preserving food warm
med. low / defrost 33%
Defrost of products, melting chocolate or glaze, melting
butter or soft cheese
medium 55% Cooking of stew meat or fish
Medium high 77% Cooking of rice, fish, dishes from chopped meat
high 100%
Warming up of drinks, boiling of water, cooking of veg-
etables. Warming up of the cooked products
• Set the cooking time according to the
recipe, by turning the handle (8) clock-
wise.
Defrost of products
• Set the handle (7) to the med. low/de-
frost position.
• Set the defrost time according to weight
by turning the handle (8) to the required
position.
• The unit automatically starts operating
after setting of the time.
• During operation you can open the door
to turn over the products; after the door
is closed the operation will be continued.
• After the time exceeds the oven will
switch off automatically and you will hear
a sound signal.
Warning: Always set the handle (8) в
положение to the "0" position to switch off
the unit, if you take out the products before
the time exceeds or if you do not use the
unit.
CLEAN AND CARE
• Before cleaning switch off the unit and
unplug it.
• Protect the control panel from water.
Wipe the panel with a soft, slightly damp
cloth.