9
ENGLISH
•
Use a small brush to remove coffee remnants
from the filter (17 and 18) openings.
•
Wipe the coffee maker body with a soft,
slightly damp cloth and then wipe it dry.
•
Wash the removable parts with warm water
and a soft detergent, then rinse with clear
water and dry thoroughly.
•
Remove the trays (5 and 6) from the unit body,
wash them, wipe with a soft cloth and install
back to their places.
•
After making cappuccino, latte or frothed
milk, dismantle and wash the milk tank lid (11)
(pic. 5, 6):
–
remove the pipe (a);
–
press the clamp «Push» (e) in the lower part on
the lid and detach the lower part of the lid (d);
–
hold the bar (9), turn it slightly and remove the
cappuccinatore pipe (b);
–
open the silicone plug (f);
–
wash all the removable parts with warm water
and a soft detergent, then rinse with clear
water and dry thoroughly.
–
assemble the lid (11): close the silicone plug
(f), install the cappuccinatore pipe (b) back
to its place, connect the body parts (d and
c), if they are connected correctly, the clamp
«Push» (e) will click; install the pipe (a) back
to its place;
–
put the assembled lid (11) on the milk tank (8).
Do not use metal brushes, abrasives or sol-
vents for cleaning the coffee maker body and
the removable parts.
STORAGE
•
Clean the unit before taking it away for stor-
age.
•
Do not store the coffee maker at the tempera-
ture below 0°C.
•
Keep the coffee maker away from children in
a dry cool place.
TROUBLES AND TROUBLESHOOTING
Failure
Cause
Solution
The unit can not be
switched on
No voltage in the socket.
The power plug is not completely
inserted into the socket.
Make sure that the electric socket is
operating.
Check whether the power cord plug
is completely inserted into the mains
socket.
Coffee leakage from
the filter holder
Loose connection of filter and
gasket, ground coffee got on the
edges of the filter.
There’s is too much coffee in the
filter or the coffee is tamped too
strongly.
Clean the edges of the filter.
Do not overfill the filter with coffee.
Coffee pours into the
cup for too long or
does not pour at all.
The coffee powder is too fine or it
is tamped too strongly in the filter.
Use ground coffee for “espresso”
coffee makers.
Experimentally define the coffee
tampering degree in the filter.
The coffee isn’t strong
enough
Coffee grinding degree is too
coarse.
The small filter (17) is installed
and the double portion mode is
switched on.
Use finer coffee grinding degree.
To make one cup of coffee, use the
small filter (17), to make two cups use
the larger filter (18).
Ready coffee has a
foreign smell
Wrong process of scale removal
in the coffee maker.
Improper storage of coffee
See the chapters «Washing the coffee
maker» and «Descaling» and clean the
coffee maker several times.
Use fresh ground coffee. Keep coffee
in a dry cool place.
The milk is frothed
poorly
You used skimmed milk
You used warm milk
Water tank is empty.
Use only whole milk with fat content
of 4-6%.
Use cold milk.
Fill the water tank
VT-1516.indd 9
04.12.2017 17:41:22
