Vitek VT-1263 B, Инструкция по эксплуатации

Страница: 6 / 28

6
ENGLISH
can start cleaning the steam chamber. Unplug
the unit.
–
Hold the iron above the sink horizontally, press
and hold the «self-clean» button (12).
–
Boiling water and steam with scale will be
released from the iron soleplate (14) open-
ings.
–
Slightly sway the iron back and forth, until all
the water leaves the water tank (10).
–
Place the iron on the base (8) and let it cool
down completely.
–
When the soleplate (14) cools down com-
pletely, wipe it with a dry cloth.
–
Before you take the iron away for storage,
make sure that there is no water in the water
tank (10) and that iron soleplate is dry.
CLEANING AND CARE
–
Before cleaning the iron, make sure that it is
unplugged and has cooled down completely.
–
Clean the iron body with a slightly damp cloth
and then wipe it dry.
–
Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
–
After removing scale, polish the soleplate sur-
face with a dry cloth.
–
Do not use abrasive substances and solvents
to clean the iron soleplate and body.
–
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
–
Before you put the iron away for storage,
clean it, open the water inlet lid (2), turn the
iron upside down and drain all the remaining
water from the water tank (10).
–
To remove the remaining water from the evap-
oration chambers we recommend to heat up
the iron. Set the temperature control knob (11)
to the «max» position and the continuous
steam supply knob to the maximum steam
supply position.
–
Insert the power plug into the socket and let
the unit heat up. When the indicator (9) goes
out, press the burst of steam button (4) sev-
eral times.
–
Switch the iron off by turning the tempera-
ture control knob (11) counterclockwise until
bumping, set the continuous steam supply
knob (3) to the position «
» (steam supply is
off), unplug the iron and let it cool down.
–
Wind the power cord around the base (8).
–
Store the iron vertically in a dry cool place out
of reach of children.
DELIVERY SET
Iron – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Maximum power consumption: 2400 W
The manufacturer reserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
IM VT-1263.indd 6 19.01.2017 10:28:15