Vitek CHRONO VT-CN1680 Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 68

Vitek CHRONO VT-CN1680 Скачать руководство пользователя страница 64

CHRONO Series DVR

63

COMPLIANCE NOTICE OF FCC:

THIS  EQUIPMENT  HAS  BEEN  TESTED  AND  FOUND  TO  COMPLY  WITH  THE  LIMITS  FOR  A  CLASS  A  DIGITAL  DEVICE,  PURSUANT  TO
PART  15  OF  THE  FCC  RULES.  THESE  LIMITS  ARE  DESIGNED  TO  PROVIDE  REASONABLE  PROTECTION  AGAINST  HARMFUL
INTERFERENCE  WHEN  THE  EQUIPMENT  IS  OPERATED  IN  A  COMMERCIAL  ENVIRONMENT.  THIS  EQUIPMENT  GENERATES,  USES,  AND
CAN  RADIATE  RADIO  FREQUENCY  ENERGY  AND  IF  NOT  INSTALLED  AND  USED  IN  ACCORDANCE  WITH  THE  INSTRUCTION  MANUAL,
MAY  CAUSE  HARMFUL  INTERFERENCE  TO  RADIO  COMMUNICATIONS.  OPERATION  OF  THIS  EQUIPMENT  IN  A  RESIDENTIAL  AREA  IS
LIKELY  TO  CAUSE  HARMFUL  INTERFERENCE,  IN  WHICH  CASE  USERS  WILL  BE  REQUIRED  TO  CORRECT  THE  INTERFERENCE  AT
THEIR  OWN  EXPENSE.

WARNING:  CHANGES  OR  MODIFICATIONS  NOT  EXPRESSLY  APPROVED  BY  THE  PARTY  RESPONSIBLE  FOR  COMPLIANCE  COULD  VOID
THE  USER’S  AUTHORITY  TO  OPERATE  THE  EQUIPMENT.
THIS  CLASS  OF  DIGITAL  APPARATUS  MEETS  ALL  REQUIREMENTS  OF  THE  CANADIAN  INTERFERENCE-CAUSING  EQUIPMENT
REGULATIONS.

WEEE (Waste Electrical & Electronic Equipment)

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)

This  marking  shown  on  the  product  or  its  literature,  indicates  that  it  should  not  be  disposed  with  other  household
wastes  at  the  end  of  its  working  life.  To  prevent  possible  harm  to  the  environment  or  human  health  from  uncontrolled
waste  disposal,  please  separate  this  from  other  types  of  wastes  and  recycle  it  responsibly  to  promote  the  sustainable
reuse  of  material  resources.

Household  users  should  contact  either  the  retailer  where  they  purchased  this  product,  or  their  local  government  office,

for  details  of  where  and  how  they  can  take  this  item  for  environmentally  safe  recycling.

Business  users  should  contact  their  supplier  and  check  the  terms  and  conditions  of  the  purchase  contract.  This  product  should  not  be
mixed  with  other  commercial  wastes  for  disposal.

ROHS Compliance

«
...
62
63
64
65
66
...
»

Содержание CHRONO VT-CN1680





































































Отзывы:

Нет отзывов