Vitek CHRONO VT-CN1680 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 68

Vitek CHRONO VT-CN1680 Скачать руководство пользователя страница 13

CHRONO Series DVR

12

Chapter 3. Using DVR

1. Basic Operation

1-1. Front Panel & IR Remote Controller

The DVR should be correctly installed before proceeding. The location and the shape of the buttons may vary depending on the DVR
model. (4-channel DVR - only most commonly used buttons will be found on the front panel.)

Control

Description

USB Port

Two USB ports are located on the front panel. A USB
mouse may be connected to its dedicated USB port.

Camera Buttons (1~0)

Pressing  camera  buttons  and  Enter  button  will  cause  the
selected  camera  to  display  full  screen.  Buttons  are  used  to
enter  passwords.

MENU / EXIT Button

Enters  the  Setup  Menu.  User  will  need  to  enter  the
authorized  password  to  access  Setup.  In  Playback  mode,
MENU  button  displays  the  Playback  Menu.

DISPLAY Button

Changes the screen display mode in the current screen or
playback screen.

SEQUENCE Button

Displays live channels sequentially.

Up, Down, Left, Right

Arrow, ENTER Buttons

These are used to change settings for the product in
MENU mode or used in PTZ control mode. (pan, tilt)

BACKUP Button

Copies recorded data to an external storage device.

PLAYBACK Button

Changes to the playback mode from the live mode.

PAUSE Button

Under  playback  mode,  the  button  can  be  used  to  pause
the  playback  screen.
-  Display  menu  to  save  PTZ  preset  under  PTZ  mode.

PLAY Button

Plays  the  video  forward.  Press  the  button  repeatedly  to
increase  play  speed  up  to  max  32  times  (1,  2,  4,  8,  16,
32  times)  faster.  Use  this  button  to  move  right  when
setting  the  menu.
-  Focus  on  far  distance  under  PTZ  mode.

R.PLAY Button

Plays  the  video  backward.  Press  the  button  repeatedly  to
increase  play  speed  up  to  max  32  times  (1,  2,  4,  8,  16,
32  times)  faster.  Use  this  button  to  move  right  when
setting  the  menu.
-  Zoom  Out  under  PTZ  mode.

STEP FORWARD Button

Move  forward  by  one  frame  under  Pause.  Use  this  button
to  move  up  when  setting  the  menu.
-  Focus  on  near  distance  under  PTZ  mode.

STEP BACKWARD

Button

Move  backward  by  one  frame  under  Pause.  Use  this
button  to  move  down  when  setting  the  menu.
-  Zoom  In  under  PTZ  mode.

EJECT Button

It will open or close the backup drive such as CD-RW or
DVD

«
...
11
12
13
14
15
...
»

Содержание CHRONO VT-CN1680





































































Отзывы:

Нет отзывов