MGW Diamond
Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6
28
To set the channel parameters:
1.
From the main menu, select
Channels
.
2.
Set the following parameters as required in each section and click
Apply
.
NOTE:
•
When switching from HEVC to H.264 (or from H.264 to HEVC), click apply before you adjust any of the
Advanced Settings
fields.
•
Fields and optional settings in each one of the sections are automatically adjusted when you switch from
HEVC to H.264 channels to display only the settings and the parameters that are applicable to the selected
channel.
•
A green frame appears when entered value is valid (see figure below).
•
A red frame appears when the entered value is not valid.
•
To apply changes to one or more fields you must click the Apply button on the bottom right. When exiting the
settings screen or starting a channel without applying the settings, the previous settings will apply.
Source Section
Video Parameters
Description
Video Input
Select the active source interface.
Detected Format
Displays the detected video/ audio format.
Force Test Pattern
Select the box to force test pattern (color bar) for testing purposes.
Audio Source
Select the audio source (Embedded or external Analog Audio).
Audio Sampling
Select the audio sampling rate (Analog Audio only).
Audio Tracks
Select the embedded audio pair (SDI Embedded Audio only).
