Vitea Care MDH DRVK0M PP, Инструкция по эксплуатации

Страница: 6 / 24

6 VITEACARE.COM
MODEL: WAY
LANGUAGE: ENGLISH VERSION: 2021-08
2.2 ASSEMBLY - FIXED FRAME
WHEELCHAIR
1. Select the appropriate mounting bracket depending on the thickness of the rear
wheels axle and the spreader bar.
2. Install the handle in the center of the axle and tighten it (Fig. 9.).
a) The cap of the handle should be above the axis/bar.
b) Tighten the eccentric clamp 1, which is in the horizontal position when tightened.
c) Lock it by slightly tilting it backwards.
Fig. 9.
Rear wheel axle
holder, diameter
22 - 40mm
Handle cap
Eccentric
clamp 1
Eccentric
clamp 2
2.3 FURTHER ASSEMBLY STAGES
3. Attach the rear module to the mounting bracket, then tighten the eccentric clamp 2
(Fig. 10.).
4. Check the stability and correct mounting of the rear drive.
Fig. 10.