Vitea Care MDH DRVK0M PP, Инструкция по эксплуатации

Страница: 7 / 24

MODEL: WAY
LANGUAGE: ENGLISH VERSION: 2021-08
VITEACARE.COM 7
5. Dismantling the rear module
• Release eccentric clamp 2 and pull the drive out of the mounting bracket (Fig. 11.).
Fig. 11.
Fig. 12.
6. Then connect the control module (Figure 13.) to the rear module. To do this, screw the
end of the cable with a pin to the control module socket on the right side of the module
(Figure 14.).
Fig. 13.
Control module
Fig. 14.
Charging
socket
Control module
socket
7. The control module should be attached to the wheelchair frame with a strap so that it
is within the user’s hand (Fig. 15.).