8
the "tick" sound, the FIX indicator turns green, then push the safety seat completely fits the
car seat.
Attention: FIX connector correct installation only if the FXI indicator is completely turn to green.
4.
Please pull out the vehicle three-point seat belt, let vehicle belly strap passes through under the
cushion pad slot (Illustration 14-A), and then pass the car seat belt through the back of two
guide grooves together (Illustration 14-B) then insert into seat belt slot (Illustration 12-C).
5. Tighten vehicle 3-point seat strap to ensure it no loose and twisted knots.
6. Open 5-point buckle then put the baby in, adjust belt to the proper position.
(Please refer to section 5.2 five-point safety belts adjustment.).
5.7. FRONT INSTALLATION
Group Ⅰinstallation (FIX+vehicle 3-point belt+top tether)
1.
Group I (fit for about 9 month to 4 years old or 9-18kg weight kid using).
NOTE: Group I (9~18KG) (Illustration 16.) Disassemble sleeping pad.
2
．
Please refer to section 5.5 to adjust the chair body (14) to the forward position and confirm that it
is locked (cannot rotate).
3
．
Please refer to section 5.4 to adjust the chair body (14) to the proper position and confirm that it is
in locked state (cannot slide).
4
．
Please refer to 5.1 section, Align vehicle FIX latch, insert from the guide sleeve, hear snap sound,
observe the sign on the FIX when red turns green indicate installation is successful (Illustration 5.),
then push the safety seat completely fits the car seat (Illustration 15.).
Attention: FIX latch is installed correctly only if the FIX indicator complete turn green.
5. Take out the sleeping pad from baby car seat.(Illustration 16-B).
6.
Please pull out the vehicle three-point seat belt, let vehicle belly strap passes through under
the cushion pad slot, then put vehicle 3-point shoulder strap through side of headrest guide
Groove (Illustration 16-A), then insert into seat belt slot. Vehicle belts should pass below
from the left pad (Illustration 16-C).
Illustration 14.
14-B
14-C
14-A
