7
5.4. BABY CAR SEAT RECLINING ADJUSTMENT (GROUP I, II, III)
•
Press the adjustment handle (11) in direction of the arrow. Let the chair body (12) in an
unlocked state so the seat body (12) can be adjusted slide to a suitable position, release the
adjustment handle (11), the chair is automatically locked again (Illustration 10.).
5.5. 360 DEGREE ROTATION ADJUSTMENT FOR BABY CAR SEAT
First adjust the seat to the forward 3 gears (Illustration 12.), and then pressthe adjuster to rotate the
seat reverse 180 degree, (Illustration 13. is seat reverse installation) rotate in place, loosen gear
adjuster, sway the seat, make sure the gear are locked (Illustration 13.).
In the course of vehicle driving, this seat can only be used in front or rear state,the seat must be
in a fixed state after the adjustment completed.
5.6.
REVERSE INSTALLATION
0+group Installation (FIX+Vehicle 3-point safety belt)
(Suit for 0 to about 1 and half year old or 0-13KG kids using)
Attention: group 0+(0~13Kg) need to use mount cushion, sleep pad.
1.
Please refer to section 5.4 to adjust the Chair body (14) to the most tilted position and confirm
it is in a locked state (cannot slide)
2.
Please refer to section 5.5 to adjust the Chair body (14) to the reverse position and confirm
that it is locked (cannot rotate).
3.
Please refer to section 5.1 for FIX, insert two FIX connectors into guide sleeve until you hear
Illustration 11.
Illustration 12.
Illustration 13.
Rotate the handle
