6
5.2. ADJUST THE SHOULDER SSRAP AND HEADREST WHEN THE BABY USING 5-
POINT HARNESS (GROUP 0+, I).
•
Press the central adjuster (4) to pull up the two shoulder straps (5) at the same time. Please do
not pull the shoulder pad (6) and release the 5-point belt to a longer position as far as possible
(Illustration 6.).
•
Pull up adjusting headrest Griphook (7), while pulling up or pressing the headrest (8) to the
appropriate position of the child and fixed (Illustration 7.).
Properly adjust the headrest (8) to ensure best protection for the children in safe seats.
Headrest (8) height must be adjusted to the same of shoulder strap and child shoulder height
(Illustration 8.).
NOTE: Shoulder straps outlet can not be under the child's shoulder or above the height of the
ear.
5.3. ADJUSTION THE HEADREST WHILE USING 3-POINT VEHICLE SEAT BELT
(GROUP II
，
Ⅲ)
•
Pressing the headrest handle by the direction of the arrow (9), let the headrest (8) in unlock
state, so that headrest can be adjusted (8) up and down to the appropriate position, release the
headrest adjusting handle (9), the headrest will be Automatic locked (Illustration 9.).
•
If
the position of the headrest (8) is not suitable for kid, you can adjust the headrest by
Griphook (7), and refer to 5.2 chapter.
•
Properly adjusting of headrest (8) to ensure that the car seat belt oblique section (10) is in the
best position to provide the best protection for children. Safety Seat Headrest (8) must be
adjusted to make the child's shoulder with the safety seat on the head (8) between
approximately two finger gaps (Illustration 10.).
Illustration 6.
Illustration 7.
Illustration 8.
Illustration 9.
Illustration 10.
