ENG
23
Page
of 44
09360 Issue 2
Vitalograph micro - Instructions for Use
c. Date/Time: Select
to set or change the date and/or
time. Use the up/down arrows to edit fields.
d. Service mode/Technician. This option
is for servicing
and technicians, a passcode is required to activate.
3.
Calibration Verification
: See section 5.4 for details
on performing a Calibration Verification.
4. About
: Contains information about the software which
should be used if making enquiries to Vitalograph or a
service agent. This information includes the Model number
(6300), Serial number of the device, the Software reference
number, date of the last Calibration Verification and date of
Service completion.
6. Power Management
The device may be powered from a computer via the USB cable or
from internal batteries. The battery icon shows the power status of
the device.
The device uses 4 x 1.5V non-rechargeable IEC60086 certified AAA
alkaline batteries.
Note:
When replacing the batteries all 4 should be replaced together.
Use batteries from the same manufacturer, never mix new and old
batteries and make sure the batteries are in the correct orientation.
6.1. Battery Power Indications
There are four levels of battery power:
Battery Full - a white battery icon.
Battery Low - half-filled white battery icon.
