17
EN
Cleaning and Storage
PLEASE NOTE!
■
Do not use any caustic or abrasive cleaning agents or cleaning pads to clean the
device. These may damage the surfaces.
• Make sure that the device is not connected to the mains power.
• Wipe down the device with a slightly damp cloth if necessary. Then wipe it down with
a dry cloth.
• Keep the device in a dry place which is protected from sunlight and is not accessible
to children or animals.
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps listed, contact the customer
service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible cause
Solution
The device
does not work.
The mains adapter is not
inserted correctly in the plug
socket.
Push the mains adapter into the
plug socket as far as it will go.
The device is not connect-
ed to the mains adapter
correctly.
Correct the connection.
The plug socket is defective. Try another plug socket.
There is no mains voltage.
Check the fuse of the electrical
distributor (fuse box).
The button
(
3
) has not
been (correctly) pressed.
Press the button
(
3
) again.
The device does not
react to the remote
control.
The battery of the remote
control is too weak.
Replace the battery of the re-
mote control.
There are obstructions be-
tween the device and remote
control (no visual contact).
Point the remote control directly
at the device.