© 2017 Vital Systems, Inc.
2
www.vitalsystem.com
Loading and Starting a Job with a GCode File ............................................................................................. 19
Troubleshooting .......................................................................................................................................... 21
The system disarms on the “TorchON” (or M3) command .................................................................... 21
The system hangs up during the “TorchON” (or M3) sequence ............................................................. 22
The Torch does not move toward the designated probe limit position ................................................. 22
The Torch completes the Torch ON setup sequence, but does not move up or down afterwards ....... 22
The Torch only moves in one direction, or the wrong direction while cutting....................................... 23
The Z axis moves too fast while cutting .................................................................................................. 23
Additional References ................................................................................................................................. 24
