Vital Systems ArcPro Mach4 Скачать руководство пользователя страница 4

 
© 2017 Vital Systems, Inc. 

 

3  

 

 

www.vitalsystem.com 

License Agreement 

 
Before  using  the  “ArcPro  Plasma  Control”  package  and  accompanying  software  tools,  please  take  a 

moment  to  go  thru  this  License  agreement.  Any  use  of  this  hardware  and  software  indicate  your 
acceptance to this agreement. 

 

It is the nature of all machine tools that they are dangerous devices. In order to be permitted to use the 

“ArcPro Plasma Control” package on any machine you must agree to the following license:   

 
I agree that no-one other than the owner of this machine, will, under any circumstances be responsible, 

for  the  operation,  safety,  and  use  of  this  machine.  I  agree  there  is  no  situation  under  which  I  would 
consider  Vital  Systems,  or  any  of  its  distributors  to  be  responsible  for  any  losses,  damages,  or  other 
misfortunes  suffered  through  the  use  of  the  “ArcPro Plasma  Control”  package  and  any  accompanying 
software.  I  understand  that  the  “ArcPro  Plasma  Control”  package  is  very  complex,  and  though  the 
engineers make every effort to achieve a bug free environment, that I will hold no-one other than myself 
responsible for mistakes, errors, material loss, personal damages, secondary damages, faults or errors of 
any kind, caused by any circumstance, any bugs, or any undesired response by the board and its software 
while running my machine or device.  

 
I fully accept all responsibility for the operation of this machine while under the control of  the “ArcPro 

Plasma Control” package, and for its operation by others who may use the machine. It is my responsibility 
to warn any others who may operate any device under the control of the “ArcPro Plasma Control” package 
of the limitations so imposed.  

 
I fully accept the above statements, and I will comply at all times with standard operating procedures and 

safety  requirements  pertinent  to  my  area  or  country,  and  will  endeavor  to  ensure  the  safety  of  all 
operators, as well as anyone near or in the area of my machine. 

 

 

WARNING:  Machines  in  motion  can  be  extremely 

dangerous! It is the responsibility of the user to design 
effective error handling and safety protection as part of 
the  system.  VITAL  System  Inc.  shall  not  be  liable  or 
responsible for any incidental or consequential damages.  
By  using  any  product  purchased  from  VITAL  System 
Inc., you agree to the license agreement. 

 

Содержание ArcPro Mach4


























Отзывы: