vita vPad comfort, Руководство по эксплуатации

Страница: 39 / 56

39
4. Materials and firing programs 5. Firing window 6. Settings 4. Materials and firing programs 5. Firing window 6. Settings
Cooling mode 2
Cooling mode 3
2 3
2 3
1
1
Note:
• Three fixed cooling positions.
• Lift position at the following temperatures:
Temperature: > 1200°C, Lift position: 80 %
Temperature: < 1200°C, Lift position 60 %
Temperature: < 900°C, Lift position: 40 %
Temperature: < 400°C, Lift position: 0 %
Note:
• The lift remains in the top position and moves to the bottom position after cooling to 400°C.
Note:
• Changes of program values are possible after starting a firing program. To avoid misfires, changes which automatically
impact other program areas are not allowed, such as changing the rise time, which causes an automatic adjustment of the
vacuum time.
5.4 Changes after program start
Please note:
• You can only change inactive program areas. The program areas that can still be changed are identified by the button
display (dark button).
•
If a program area that is still available is selected for changing and it becomes active, the display switches to the image of
the firing curve and the program continues to run with the previously contained value.
• If the final temperature is changed, the °C/min gradient is always retained, and the rise time and vacuum time are adjusted
accordingly.
ADDITIONAL
INFORMA
TION
SCOPE OF SUPPL
Y/
VIT
A SYSTEM SOLUTIONS
TECHNICAL DA
TA
SETTINGS
FIRING WINDOW
MA
TERIALS AND
FIRING PROGRAMS
OPERA
TION
FIRST USE
THE SYSTEM