Vistaflame VF 100A, Руководство пользователя

Страница: 26 / 40

Figure 33: Corner brackets for
trim.
Figure 34: Two pieces of
corner bracket.
2. Attach the other side trim piece to the
top trim, using the same method used
in Step 1.
3. Using three (3) T-20 screws on each side
attach the hinges on the side surround
panels to the unit’s side panels (refer to
Figure 35).
4. Plug the wiring harness into the control
panel (see Figure 31).
Installation
I
NSTALLATION AND
R
EMOVAL OF
T
HE
S
URROUND
P
ANELS
- I
NSERT
:
1. Attach one side trim to the top trim, using a corner bracket (see Figure 33) to secure pieces together.
There are two (2) main pieces to each corner bracket (see Figure 34). When installing the corner
pieces into the trim, the “B FACE” sides must face each other and the screw heads are to face out.
With the bracket in place and the top and a side trim snug together, use a flat head screwdriver to turn
the two (2) screws in the bracket to tighten it into the trim.
Figure 35: Panel placed on unit.
5. Loosen the front hopper lid screws and center the top surround
panel under the hopper lid., tighten screws.
6. Insert each side panel anchor bolt through the top panel into
the corresponding side panel holes and tighten using a 7 /
16
”
wench or socket (refer to Figure 36).
7. Place assembled trim over the surround assembly.
REMOVAL:
When maintenance is required on the unit the surround must be
removed. Follow steps 4 through 7 in reverse order.
Figure 36: Assembling the Surround
Panel, back view.
Side surrounds
swing out
Figure 37: Side surround panel swings forward.
The side panel can
remain attached because
they swing forward for
easy access (refer to
Figure 37).
26