18
Alarm : The alarm output (Yellow and Black pair) can be activated by the
Detection or Scene change functions is configured as follows:
Period: Alarm out period (5sec/10sec/20sec/30sec/1min/5min/Cont.)
Snooze: Alarm out snooze(Off/5sec/10sec/20sec/30sec/1min/5min)
(This is the period of time before the alarm will become armed again after
an alarm has cleared)
Active pol: Alarm output active state configuration. (Low, High)
(Low
– N.O. High – N.C.)
System Init
Cancel: Back to General Setup Menu.
Confirm: Initialize all data. (Factory Default)
3) Lens
Iris : DC, Video, Manual Lens selected Iris : adjust AE Speed
DC lens and video lens can adjust AE Speed
Normal AE Ref (Auto Exposure Reference Level) :
Press the Enter button to
access the AE Ref.
Ref Lvl: Adjust AE base reference level.
WDR Ref:
Press the Enter button to access the WDR Ref.
Ref Lvl: Adjust the WDR long-time control Base Reference Level.
4) LLC (Line Lock Control) :
Press the Enter button to access the Line Lock mode.
Func: Select Line Lock function On/Off using the Left and Right buttons.
Phase: Adjust Line Lock sync phase using the Left and Right buttons. (0~100)
The LLC function is only available if the camera is powered by and AC source.
