11
CAMERA ADJUSTMENT
White Balance
1) Auto(Auto White Balance)
: AWB mode (1800ºK ~10500ºK)
2) Push/Hold:
Push & Hold Mode.
To find the Optimal setting for the current environment, place a sheet of white
paper in front of the camera, select Hold and press the Enter button.
3) CRS Mode (Colour Rolling Suppression):
Function is not used on this camera.
4) Outdoor
: Sets the colour temperature to outdoor (6300ºK)
5) Indoor
: Sets the colour temperature to indoor (3200ºK)
6) FL (Fluorescent Light):
Sets the colour temperature for fluorescent lighting
conditions.
7) User (User Set White Balance):
Adjust red or blue gain.
R(R-GAIN):Adjust R-GAIN value (0-255)
B(B-GAIN):Adjust B-GAIN value (0-255)
Auto Exposure
1) SHT(s)(Electronic Shutter) :
Select Shutter mode.
Auto (1/50 ~ 1/100,000) Auto run, Manual 8 step from (1/50 ~1/10,000)
.
2) FLC (Flicker-less):
Flicker-less On/Off.
3) AGC(Auto Gain Control) :
AGC Gain(Off, Low, Middle, High)
4) Sense-Up (Slow Shutter):
Maximum Slow-Shutter select. (x2-x32 and Off)
5) Offset Add:
Forces the picture to turn up in a low luminance environment.
BLC/WDR
1) Normal AE:
BLC/WDR function off.
2) WDR (Wide Dynamic Range):
Wide Dynamic Range mode on.
3) EHLC (Excessive High Light Compensation):
EHLC mode on.
The brightest part of the picture is blacked out to allow the other areas to be
viewed.
4) Auto (Auto Weighting BLC):
Auto weighting BLC on.
