14
If an object is passing too fast through the two detection areas, the counting may fail to
operate. Then in this case, increase the space between the two zones or decrease the
size of the zones.
If the passing object is too long, counting results can be inaccurate. Then in this case,
increase the space between the two zones or decrease the size of the zones.
If two objects pass across the area in the same time, then results can be inaccurate.
Entrance: Entrance counting mode. The object move in through the entrance,
counting number increases
Size: Adjust the size of the entrance.
Posi: Adjust the position of the entrance
Alarm Cnt: Sets the number of entrance activations required to activate
an alarm
Reset Cnt: Manually resets the count to Zero. The count will
automatically reset after the Alarm count is reached
1. Crossing objects are ignored
2. Multiple objects will not be detected.
3. If the distance is to long from the camera to entrance, the results can be
inaccurate.
2)
Sens Down:
Adjusts the Detection Sensitivity using left/right (L/R) Buttons. The lower
the figure the more sensitive the function is.
