Vista PowerDome Series, Руководство по установке

Страница: 30 / 44

PTZ and Dome Installation PowerDome Installation Manual
See Figure 46 and perform the following.
Figure 46. Installing the PTZ assembly
1) Insert the safety catch ( ) though the channel in the retaining bracket ( )
attached to the upper housing.
Note: When completing the next step, the PowerDome will move (become active) in both the pan and tilt directions, as part of
its orientation protocol.
2) Push the spring latch handle ( ) outward while pivoting the pan/tilt assembly up until it is vertical.
3) Secure the pan/tilt assembly by releasing the latch handle and engaging the catch tab ( ).
4) Check to ensure that the four plastic mounting studs ( ) are mated with the four alignment holes
( ).
30 1040647A / July 2003