Visonic POWERMAX -, Руководство пользователя

Страница: 15 / 38

ELECTRICAL APPLIANCE CONTROL
14 DE5467U
4. ELECTRICAL APPLIANCE CONTROL
(Not to be used in UL listed systems)
Control Options and Pushbuttons
The system allows manual or automatic remote
control of up to 15 electrical devices (lights, radio/TV,
tape recorders, fans etc.). This requires an optional
X-10 controller and up to 15 remote X-10 units (see
Fig. 2). ON / OFF control codes are communicated
via the regular household electrical wiring.
Besides the X-10 units (numbered 1 to 15), it is
possible to control a device connected to the PGM
output (unit # 00).
While programming the system, your installer
determines ON and OFF times for each remote
controlled device. He also determines which zone
sensors will switch the remote controlled appliances
on and off.
However, the decision whether the
remote controlled appliances will respond as
programmed is up to you
(see next table).
Key Function
Manual activation of lights or other
household electrical appliances.
Manual deactivation of lighting or other
household electrical appliances.
Selecting the active automatic control
method:
Sensors: Appliances are controlled by
sensors (assigned by the installer for
this).
Timer: Appliances are controlled by
timer (ON and OFF times are defined
by the installer).
Both: Appliances are controlled by
sensors as well as by a timer.
Examples of benefits gained by automatic remote
control:
•
Timer Control. When you are away, the timed
activation / de-activation of lights, radio and TV
simulates the presence of people at home, to
deter potential burglars.
•
Zone Control. Upon disturbance of a perimeter
zone, lights are switched on and a tape recorder
starts running, playing back a series of dog
barks.
Note : Automatic activation and deactivation of
electrical appliances depend also on the
Scheduler setup (see
Chapter 7 - Scheduler
Function).
Manual Switch-On
You can switch appliances ON as instructed below.
This example shows how to switch on the lights
controlled by X-10 unit No. 01.
PRESS RESULTANT DISPLAY
LIGHT ON
LIGHT ON 1
↓
READY HH:MM
The lights controlled by X-10 unit No. 01 are
switched on.
Manual Switch-Off
You can switch appliances OFF as instructed below.
This example shows how to switch off the lights
controlled by X-10 unit No. 01.
PRESS RESULTANT DISPLAY
LIGHT OFF
LIGHT OFF 1
↓
READY HH:MM
The lights controlled by X-10 unit No. 01 are
switched off.
Light DIM/BRIGHT
Immediately after activating a light (see Chapter 4 -
Manual Switch ON), you can dim or brighten it as
desired. For this purpose, enable the DIM/BRIGHT
function by pressing
or , then press several
times (as desired) the
(DIM) or
(BRIGHT)
button.
Automatic ON/OFF Control
You can select two of four options:
By Timer ON By timer OFF
By sensor ON By sensor OFF