Visiontek Vehicle Tracking Unit 84VT, equipped with state of the art GPS receiver provides
reliable and accurate navigation data. The unit enables the vehicle owners or third parties to
track the location of a Truck, Ship, Container, Car or any object which is moving.
All the communication with the user/server is handled by Tri-Band GSM/GPRS module which
accurately delivers all the navigation date. The communication is either through Short
Message Service (SMS) or GPRS network.
The Visiontek 84VT is provided with a RS-232 port for configuration of the unit. The unit can be
also remotely configured (OTA Configuration). In addition the unit is provided with two
switches (One for Voice & One for SMS) for communicating with pre-defined numbers. A voice
port is provided for two way communication and buzzer is provided for incoming calls alert.
The unit can be configured to receive the incoming calls from pre-defined numbers.
FEATURES:
n
Tri-band 900/1800/1900 MHz GSM/Gprs Module
n
GPS receiver with 20 channels
n
Local and Remote configuration over the air
n
Real Time Clock (RTC)
n
Wide DC input voltage range (9V-30V)
n
RS232 Serial Port
n
SMS / Gprs Communication
n
Switch for voice & SMS communication
n
One SOS switch for sending SMS to pre-defined number
n
Support TCP & UDP
n
Real Time Clock (RTC)
n
On-line and Off-line tracking
n
LED indication for GSM, GPS and Power status
n
Voice port for two way voice communication (Headset Only)
n
Buzzer for incoming calls indication
n
Configure upto 5 incoming call numbers
n
GSM + GPS Combo antenna
1
Introduction
1
2
SIM Installation
NOTE :
PIN Code of the SIM Card must be DISABLED
1. The Visiontek 84VT unit can be easily opened by removing the four screws connected as
shown in the figure. Make sure that the power cable is not connected to the power source