Visionary MV4, Руководство пользователя

Страница: 41 / 43

39
Troubleshooting
F
ACTORY
D
EFAULT
S
ETTINGS
This procedure provides a way to reset the MV4 units back to the factory default settings, which may be necessary or desirable in
certain circumstances.
The unit will reboot to its factory default settings. Note that a factory default causes all of the settings, including the network
settings, to be reset to factory default values. Performing a factory default reset will restore the IP.MODE settings to DHCP,
causing the unit to acquire a new IP address. If there is no DHCP server available on the network, the unit will use Auto IP
addressing. See section Network Discovery .
Method 1:
1. Access the web interface for the unit that will be factory defaulted.
2. Log in with username =admin password =admin.
3. Click the System tab.
4. Click Factory Default .
5. Click OK on the pop-up.
6. The unit will reset to its factory default settings.
Method 2:
1. Locate the reset button on rear panel of the MV4.
2. Use a paperclip or similar device to press physical reset button.
3. Press and hold the reset button until the LED on the front of the MV4 indicate the unit has been reset (Fast Link LED).
4. The unit will reset to its factory default settings.
Reset : Used to factory default encoder and all decoders.