Visionary MV4, Руководство пользователя

Страница: 24 / 43

22
Decoder Options
Factory Default – This button factory defaults the unit. See section Troubleshooting.
Change Password – This button changes the unit’s web interface login password to values entered below (default is admin).
• Password – enter new password
• Reenter Password – reenter new password
Important : Make sure you write the new password down. If it is lost or forgotten, you will need to call Visionary Solutions
support to assist in a console factory default of the unit.
Select update file – Browse to a new firmware file supplied by Visionary Solutions or downloaded from visionary-av.com .
Update Unit – This button will initiate a firmware update per the specified file above.
Information – Real-time status messages displayed during a reboot, firmware update, or factory default action.
D
ECODER
O
PTIONS
MV4 D
ECODER
D
EVICE
T
AB
UNIT.ID
– By default, the UNIT.ID of the decoder is the Model Number and the serial number (
e.g.,
MV4D-000104, serial
number: 186-007-000104
)
. The UNIT.ID can be changed by the user on the
Network
tab.
UNIT.MODEL
–MV4D (decoder).
UNIT.SERIAL – The serial number of the unit. The serial number can also be found on the bottom label of each unit.
UNIT.FIRMWARE – The current firmware version of the unit.
UNIT.FIRMWARE_DATE
– The date the firmware was released.
MONITOR BUTTON
– Displays the live thumbnail preview of the video being received from the AV stream.