Chapter 9 Unit Connections
AVN422HD User’s Manual
42
9.4 Audio Terminal Block Connector
9.4.1 Pinouts
See the following paragraph for instructions on configuring the supplied Audio terminal block
connector (supplied).
9.4.2 Configuration
The following describes how to configure the Audio terminal block connector:
1. Cut and strip the wires on the cable that will connect to your audio source. The strip length
should be approximately 1/4 inch long.
2. For each connection, insert a small object, such as a screw driver, into the terminal block’s
latch in order to open the wire clamp.
3. Insert each wire into its wire clamp.
4. Release the latch allowing the wire clamp to close.
Pin
Function
1A
Right Ground
2A
Right Balanced Audio Negative
3A
Right Balanced Audio Positive
4A
Right Unbalanced Audio
1B
Left Ground
2B
Left Balanced Audio Negative
3B
Left Balanced Audio Positive
4B
Left Unbalanced Audio
View is looking into the connector.
Содержание AVN422HD
Страница 6: ...Contents AVN422HD User s Manual vi...
