AVN422HD User’s Manual
Chapter 4 Operating the AVN422HD
11
Chapter 4 Operating the AVN422HD
The AVN422HD has three control interfaces that you can use to operate and configure the AVN
units:
•
PackeTV
®
Configuration Utility (not currently supported) – GUI-based programs installed on
a Windows-based PC.
•
Browser Interface – uses a browser interface.
•
AVN Control Protocol Application Programming Interface (AVNCP API) – available upon
request from Visionary Solutions, Inc.
The AVN’s Console Interface may only be used to configure the unit’s network settings (IP
Address, Netmask, Gateway and DNS). This interface does NOT support general device control.
4.1 PackeTV
®
Configuration Utility
This section is under development.
4.2 AVN422HD Console Interface
For information on using the AVN422HD Console Interface, refer to
Chapter 5 Using the Console
Interface
.
4.3 AVN422HD Browser Interface
The AVN422HD must be on a network in order to connect to its Browser Interface. Once
connected:
1. Type the following URL (
http://xxx.xxx.xxx.xxx
) into your browser, where the
xxx.xxx.xxx.xxx corresponds to the AVN422HD’s IP address.
2. Click
Enter/Go
. The AVN422HD’s Web Management Login Page will display.
3. Enter the Username and Password of the AVN422HD and click the
Login
button. The
AVN422HD’s Browser Interface pages will display.
Refer to
Chapter 6 Using the Browser Interface
for information about the Browser Interface
pages and their functionality.
4.4 AVN Control Protocol (API)
For programmers who wish to integrate AVN control functionality into their own applications, the
AVN Control Protocol (API) offers all the "hooks" needed. Contact
for
AVN422HD API documentation. Available to prequalified customers only.
Содержание AVN422HD
Страница 6: ...Contents AVN422HD User s Manual vi...
