Vision VE810 4 Series, Руководство пользователя

Страница: 111 / 145

Advanced Operation 111
© 2015 Vision Engraving Systems
5.3 Creating a Center Driver
In this section, a custom driver will be created based on the VE810 S4 Vise driver that will allow the user
to set a home position in the center of an engraving area. The Vision 9 software will automatically
position the job based on this center location. An illustration of this process is shown below.
For simplicity in this example, a circular piece of acrylic will be engraved. The material is 3 inches in
diameter, and an engraving area of 1.75" x 0.75" needs to be centered on the piece of acrylic.
Referencing the drawing below, the job will be quickly set up using a custom "Center" driver.
First, we need to create and save a custom Center driver. Open up the Vision 9 software and select
Engrave, then Engraving Defaults from the top menu bar.