Vision TR537S, Руководство пользователя

Страница: 10 / 28

VISION RF PAGING SYSTEM USER’S GUIDE
7
System Operation
ARMING
NORMAL ARMING
This method is the typical way to Arm,
with the shock sensor enabled. Ensure
that all doors are closed and then press
Button-I on the Pager remote. After you
press Button-I, the doors will lock and hazard lights will flash once (if
supported). The siren will chirp 1 time, the Pager remote will beep once
and update (see Fig-1 below), and Status LED will light for 5 seconds.
(The siren can’t be triggered while the LED is lit — See “Error Chirp” on
the next page.)
SILENT MODE ARMING
This method of Arming will complete-
ly disable the siren (no confirmation
chirps, no warning chirps, no siren
blast). Press Pager Button-II then re-
lease. The doors will lock and hazard lights will flash once (if supported).
The Pager will play a melody and update (see Fig-2 below), and Status
LED will light for 5 seconds. (The siren can’t be triggered while the LED
is lit — See “Error Chirp.” )
FIG-1: Pager LCD Icon Change After Arming
FIG-2: Pager LCD Icon Change After “Silent Mode” Arming
Be sure to read the “Arming Mode
Note” at the bottom of page 9.