40
FIGURE B
FIGURE A
1) Turn off power and remove the power cord from the unit.
2) Remove the console as outlined in Section 7.11.
3) Remove the emergency stop switch set as outlined in Section 7.12.
4) Remove the 8 screws holding the console frame to the handlebar frame (Figure A).
5) Remove the console frame from the handlebar frame.
NOTE:
The console cable wiring needs to be removed from the console frame as it
is removed (Figure B).
6) Reverse Steps 1-5 to install a new console frame.
7) Test the treadmill for function as outlined in Section 7.15.
7.13 CONSOLE FRAME REPLACEMENT
CHAPTER 7: PART REPLACEMENT GUIDE
