![background image](http://html1.mh-extra.com/html/vision-fitness/e1500-frame-9/e1500-frame-9_service-manual_1031781016.webp)
16
Solution
:
1. Re-connect the console wire
2. Check if the speed sensor wire works. Enter Engineering Mode (See Chapter 3), and scroll
to ENG 2 (Machine Test).Press the key “ENTER”, and then pedal the machine.
- If the left 8 blocks are flashed (Fig. E), the speed sensor works well.
- If the left 8 blocks are not flashed, the speed sensor wire is defective or it is not
well-assembled. Replace the sensor speed wire if it is defective.
(Fig. E)
3. Check the gap between speed sensor and the magnet on the pulley. It is normal within 5mm
(Fig. F). Adjust it if the gap is too big.
(Fig. F)
4. Re-install a new magnet(Fig. G) if it is missed from the pulley.
(Fig. G)
Содержание E1500 Frame 9
