30
31
Visiomed - KD-798 - Manuel d’utilisation - 0720176
Visiomed - KD-798 - Manuel d’utilisation - 072017
External
dimensions
84mm (L)/ 65mm (W)/ 30mm (H)
Weight
Approx. 125g (Device and Batteries)
Accessories
Cuff (wrist circumference 14~19.5 cm). Instruction manual, Case,
2 batteries -1.5V AAA
Voltage
3 Volts DC
The manufacturer reserves the right to modify the product technical specifications without prior
notice.
15. TROUBLESHOOTING GUIDE
If any of the following problems occur when using your TensioFlash®, please refer to this
troubleshooting guide. If the problem persists, please contact our customer service at 0 892 350 334
(0,40€/mn).
PROBLEM
POSSIBLE CAUSE
SOLUTION
Nothing is
displayed
when the
START/STOP
button is
pressed
No battery inserted
Insert batteries
The batteries are used
Insert new batteries
The batteries are not placed in the
correct polarity direction
Observe battery polarity
Screen displays
abnormal
results
The cuff position was not correct or it
was not properly tightened
Apply the cuff correctly and try
again
The body posture was not correct
during the measurement
Review the suggestions before
measurement
You moved during the measurement or
you were not sufficiently relaxed.
Do not move during the
measurement. Relax for 10 minutes
before taking your blood pressure.
Arrhythmia
The device is not suitable for people
with severe cardiac arrhythmia
Screen
displays "Er 5"
Cuff pressure is above 300mmHg
Measure again after 5 minutes. If
the error persists contact customer
service
Screen
displays "Er 6"
More than 3 minutes with cuff pressure
over 15mmHg
Screen
displays "Er 7"
EEPROM access error
Screen
displays "Er 8"
Device parameter checking error
Screen
displays "Er A"
Pressure sensor parameter error
