VISIOMED bewell connect MyTensio BW-BA1, Руководство пользователя

Страница: 13 / 52

BewellConnect - BW-BA1 - User Manual - 122016V1 13
4-5. SUGGESTIONS BEFORE MEASUREMENT
- The first time you use the device, please charge the battery using the USB port provided. Con-
nect the USB cable provided to your computer to charge the device. When the device is fully
charged, please unplug the USB cable.
- Avoid eating, smoking or exercising 30 minutes before taking measurements. Relax for 15 mi-
nutes before taking blood pressure.
- Stress increases blood pressure. Avoid taking measurements during stressful periods.
- You must take blood pressure in a calm environment and you must be relaxed and seated with
your arm on a table.
- Remain stationary and do not speak whilst taking blood pressure.
4-6. INSTRUCTIONS
See diagram B page 2
Do not take measurements over clothing. Remove jewelry from the arm you are measuring before taking
measurement (watch, ring, bracelet etc.).
- Sit down on a chair with your feet flat on the floor (do not cross your legs).
- Ensure your mobile phone or tablet with the BewellConnect® app is within reach.
- Put the blood pressure monitor around the arm with the orange marker at the bottom.
- It must be 0.7 - 1.1 in / 2-3 cm from elbow crease. The orange marker must lie on the inside arm’s
artery.
- Close the velcro (not too tight).
- Press ON/START to turn the blood pressure monitor on. The blue LED lights up.
- Put your arm on the table, palm up so that the blood pressure monitor is level with the heart.
- Remain seated and calm for 5 minutes before taking measurement.
Note : For more reliable results, take measurements on the same arm. The measurement results are given
for information. If in doubt about your results, please contact your doctor.
4-7. DOWNLOAD APPLICATION
The following information may be altered.
bw
My
Download the BewellConnect® app on your mobile phone or tablet :
- App store or Google Play
- scan the QR Code on the side of the box
Then click on the My Tensio icon.
4-8. USER GUIDE
Launch the BewellConnect® app and click on
My Tensio.
- Press START on the screen (app) to begin measurement.
- The armband inflates automatically. 3 blood pressure measurements are repeated automatically.
- The armband inflates and deflates three times in a row based on the My Tensio app procedure.
Do not remove the armband before the 3 blood pressure measurements. The measurements
are automatically sent to the app via Bluetooth 4.0.
- Once the measurements have been taken, the average of the 3 is displayed on the app screen.
- Press the ON/START to turn it off. The unit automatically turns off after approximately 1 minute.
- To determine which arm you will continue to take readings on, do both on your first reading.
In the event of asymmetrical blood pressure (right systolic blood pressure-left systolic blood
press >20 mmHg), take reading from the arm with the highest value except in the event of
contraindications in this arm.
Notes :
- The measurement will be too low if the armband is higher than the heart or too high if it is lower than
the heart.
- If you want to stop the blood pressure measurement at any point, press the ON/START to turn it off.
- Speak to your doctor if you have any questions about using the blood pressure monitor.
4-9. MEASUREMENT RESULTS
The app automatically evaluates the MAM (Measurement Average Mode) and uses WHO color
grading to provide the result.
5. HOW TO MAINTAIN AND STORE THE UNIT
- Use a dry soft cloth to clean the unit. If necessary, use a cloth lightly dampened with tap water.
- Do not use alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff.
- Before using please wash your hand. Do not wash or wet the cuff.
- Avoid placing the unit where there is direct sunlight, high humidity or dust.
- Roll up the pressure armband and store in its case.
6. HOW TO PREVENT A MALFUNCTION
- Do not drop the device and avoid sudden jars or shocks.
- Do not insert other objects into any holes.
- Do not attempt to disassemble the unit.
- Do not put the unit in water.
- The monitor might not meet its performance specifications or may cause safety hazard if
stored or used outside the specified temperature and humidity ranges in specifications.