BW-108
11B
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and the display will show the temperature of the unit. To go back to
the functions press the
MENU
button again.
Fixture Hours
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and the display will show the number of working hours of the unit. To
go back to the functions press the
MENU
button.
Software version
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and the display will show the version of software of the unit. To go
back to the functions press the
MENU
button.
5. How To Control The Unit
You can operate the unit in two ways:
1. By master/slave built-in preprogram function
2. By universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX
address setting will be effected at once. Every time you turn the unit on, it will show
on the display, after that the unit will be ready to receive DMX signal or run
the built in programs.
5.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other
units to give an automatic show. This function is good when you want an instant show.
You have to select
(show 1) or
(show 2) ……or
(show 19,
show17~19 have to be edited by the user) show for the first unit. Its DMX input jack
will have nothing plugged into. The other units will be slave mode automatic.
5.2 Universal DMX Controller
Use universal DMX controller to control the units, you have to set DMX address from
1 to 512 channel so that the units can receive DMX signal.
BW-108
8B
the mode has been selected, press the
ENTER
button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the
previous functions without any change press the
MENU
button.
Show Mode
Press the MENU button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and UP button to select the
(show 1) or
(show 2) ……
or
(show 19) show. Once the
show has been selected, press the
ENTER
button to setup or automatically return to
the main functions without any change after 8 seconds. To go back to the previous
functions without any change press the
MENU
button.
Blackout Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(yes blackout) or
(no blackout) mode. Once the mode has been
selected, press the
ENTER
button to setup or automatically return to the main
functions without any change after 8 seconds. To go back to the previous functions
without any change press the
MENU
button.
Program Shows
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(show 17) or
（
show 18
）
or
(show 19) show. Once the show
has been selected, press the
ENTER
button to enter setting program. You can select
(length, the steps, you choose from the total amount of steps, you want to run,
for example, if the total amount of steps you set is 50, you can choose only first 1-10
steps to run).
(step), select
to set
(color) and
(dimmer) for every step. Automatically return to the main functions without any
change after 8 seconds. To go back to the previous functions without any change
press the
MENU
button.
For dimmer, the function corresponds to the value shown below:
