BW-108
7B
DMX 512 Address Setting
Press the MENU button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the
DMX 512 address. Once the address has been selected, press
ENTER
button to
setup or automatically return to the main functions without any change after 8
seconds. Back to the previous functions without any change press
MENU
button.
Channel Mode
Press the MENU button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(12 channels) or
(9 Channels) or
(4 channels) mode. Once
Once you set
to
, after running in show mode for 5
minutes without any change or restarting the unit, the key board
become locked. Press ENTER button to enable the menu, the display
will show
, press UP and DOWN button until it shows
,
then press ENTER to unlock.
BW-108
12B
Press the
MENU
button up to when the
is showing on the display.
Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address. Once the address has been
selected, press and keep
ENTER
button up to when the display stops
blinking or storing automatically 8 seconds later. To go back to the functions
without any change press the
MENU
button again. Please refer to the
following diagram to address your DMX512 channel for the first 4 units
：
12 Channels:
9 Channels:
4 Channels:
