VISIO BW-108, Руководство пользователя

Страница: 10 / 10

BW-108
9B
value function
0-199 Dimmer from 0% to 100%
200—247 Strobe from slow to fast
248-255 Open
Manual Mode
Press the MENU button up to when the is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the
， ，
(red, 1 for 1section, 2 for 2 section, 3 for 3 section ) or
， ， （
green
）
or
， ，
(blue) or
(dimmer) or (strobe) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any
change after 8 seconds. To go back to the previous functions without any change
press the MENU button.
For strobe, the function corresponds to the value shown below:
value function value function
0-7 OFF 182-189 Open
8-15 Open 190-231 Slow close fast open
16-131 Strobe from slow to fast 232-239 Open
132-139 Open 240-247 Random strobe
140-181 Slow open fast close 248-255 Open
Adjust White Balance
Press the MENU button up to when the is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the
(red) or (green) or (blue) mode. Once the mode has been
selected, press the ENTER button to setup or automatically return to the main
functions without any change after 8 seconds. To go back to the previous functions
without any change press the MENU button.
Self-Test
Press the MENU button up to when the is blinking on the display. Pressing
BW-108
10B
ENTER button and the unit will run self-test by built-in program. To go back to the
previous functions press the MENU button.
LED
Press the MENU button up to when the is shown on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the
(display on) or (display off) mode. Once the mode has been selected,
press ENTER button to setup or automatically return to the main functions without
any change after 8 seconds. To go back to the previous functions without any change
press the MENU button.
Display Inversion
Press the MENU button up to when the is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the
(normal) or (inversion) mode. Once the mode has been selected,
press the ENTER button to setup or automatically return to the main functions
without any change after 8 seconds. To go back to the previous functions without any
change press the MENU button.
DMX Control Mode
Press the MENU button up to when the is shown on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the
(DMX control) or (manual control) mode, press the ENTER button
to confirm. If is selected, use DOWN and UP button to select or
… or , press ENTER button to confirm, then use DOWN and UP
button to adjust wait time or speed or dimmer, press ENTER button to store or
automatically return to the main functions without any change after 8 seconds. Back
to the previous functions press MENU button.
Key Board Lock
Press the MENU button up to when the is shown on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the
(key board lock) or (normal). Once select, press the ENTER button
to setup or automatically return to the main functions without any change after 8
seconds. Back to the previous functions press MENU button.
Temperature Test